Faucet Repair in Jacksonville, NC: A Complete Guide

A faucet is one of the most used fixtures in your home, so it’s important to keep it in good working condition. But over time, even the best faucets can start to leak or become difficult to operate.

If you’re having trouble with your faucet, don’t despair—in most cases, you can fix the problem without calling a plumber. In this article, we’ll show you how to troubleshoot and repair a leaking or malfunctioning faucet.

What Causes Faucets to Leak or Malfunction?

There are several different reasons why faucets leak or don’t work properly. In many cases, it’s simply a matter of replacing a worn-out washer or O-ring. But sometimes, more extensive repairs are necessary, where you should schedule faucet repair in Jacksonville, NC.

Common causes of faucet problems include:

Worn-out washers or O-rings: Washers and O-rings are small rubber or plastic parts that seal the connection between the moving parts of the faucet and the stationary parts. Over time, these parts can become worn or damaged, causing leaks.

Loose connections: If the connections between the various parts of the faucet are loose, it can cause leaks. In this case, you have to get help from a professional experienced in faucet repair in Richlands, NC.

Misaligned components: If the moving parts of the faucet are not properly aligned, it can cause the faucet to leak or malfunction.

Clogged aerators: The aerator is the small screen at the tip of the faucet that breaks up the water flow and prevents debris from entering your plumbing. If the aerator becomes clogged, it can restrict the water flow and cause the faucet to leak or drip.

How to Repair a Leaking or Malfunctioning Faucet?

Here are some tips for troubleshooting and repairing a faucet:

1. Make sure the water is turned off before you start disassembling the faucet.

2. Check to see if the problem is with the supply lines by turning on the water at another faucet in your home. If there is no water coming out of that faucet either, then the issue is probably with your main water supply and you’ll need to call a plumber.

3. Check all of the connections to make sure they are tight. Loose connections are often the cause of leaks.

4. If the problem is with the handles, try replacing the O-rings. These are small rubber rings that seal the water in and are located under the handles.

5. If you still can’t figure out what is causing the problem, you may need to replace the entire faucet. This is a fairly easy process and there are many how-to videos available online.

If you follow these tips, you should be able to fix the most common faucet problems yourself. However, if you are still having issues, it’s best to call a plumber. They will be able to diagnose the problem and make the necessary repairs. The faucet repair cost in Jacksonville, NC will be much less than the cost of replacing the entire faucet. So, it’s worth it to at least try to fix the problem yourself before calling a professional.

Need help with your faucet?

Call Wild Water Plumbing today! We provide plumbing services in Jacksonville, NC, and the surrounding areas. Our experienced plumbers can help you with any plumbing issue, big or small. We also offer faucet repairs and replacement services.

Call us today at 703-586-7025 to schedule a consultation!